Bike Fitments & Shock Conversions

Contact us for alternative options

Cane Creek DB Coil Rear Shock for Giant Reign
Trunnion Mount top (54 mm wide, M10 x 1.0 threaded holes)
Open lower eyelet (no bushing) to fit Giant main pivot
205 mm eye to eye length 62.5 mm stroke
9.5 mm shaft
Fits Giant Reign 2018+
Spring included - select your rate (use our spring calculator to work out spring rate) Learn More

Shock Hardware Kit - 10 x 60 mm, 7 piece (FOX)

10 mm bolt hole, 60 mm total width
Contains one pair of 1/2" flanged polymer bushings, stainless steel pin, two collars and o-rings
Fits almost all Fox rear shocks
Fits top end of shocks fitted to non-thru shaft Trek Fuel EX 2017-19

Fox Part Code: 803-03-321 Learn More

Shock Hardware Kit - 8 x 49.8 mm, 5 piece (FOX)

8 mm bolt hole, 1.960 inch (49.8 mm) total width
Offset collars
Contains one pair of 1/2" flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks
Fits lower end of shocks fitted to non-thru shaft Trek Fuel EX 2017-19

Fox Part Code;  803-03-229 Learn More

Shockcraft Lift Kit 25mm
Includes extender, DU bush, pin and bolt.
Fits all shocks using 1/2" eyelets.

Shockcraft Part Code:  SC-LK25-KIT Learn More

Shockcraft Lift Kit for Trek Remedy, Slash, Rail or Fuel
Allows installation of 205x60-65mm Remedy/Slash Rail
or 185x52.5-55 mm Fuel EX130 Trunnion shock
Increases piggy-back to frame clearance
Available with 40 mm centred or 50mm offset pin.

Shockcraft Part Code: SC-LK-25-TREK

Learn More

Shock conversion kit to replace an eyelet mounted Reaktiv shock on a Trek Fuel, Remedy or Slash with a metric eyelet shock.
Kit contains a pair of pins (one custom manufactured) which use the original 10 mm bolts and spacers.
60 mm Upper pin is 10 mm ID, 15mm OD and duplicates the original pressed in pin with no bushing.
50 mm Lower pin is 10 mm ID, 12.7mm OD and offset to one side.
Both require use of the original 10 mm mounting bolts and spacers.

Fuel requires a 210 x 55 mm shock.
Slash & Remedy require a 230 x 57.5 or 230 x 60 mm shock.

Learn More

Shock conversion kit to replace a trunnion mount Reaktiv shock on a Trek Fuel, Remedy or Slash with a metric eyelet shock.
Kit contains a pair of custom manufactured pins which use the original trunnion bolts and spacers.
54mm Upper pin duplicates the original trunnion shock dimensions and threads.
50mm Lower pin with offset collars for MY2018-2020 Remedy, Slash & Fuel EX130
40mm Lower pin for MY2021-23 Slash & Rail

All feature an internal hex to allow easy removal of stuck bolts.

Fuel requires a 210x52.5mm shock or 210x50mm depending on size and year.
Slash & Remedy require a 230x57.5 or 230x60mm shock.
Slash MY2021-23 require a 230x62.5mm shock.

Learn More

Shock conversion kit to replace a trunnion mount Reaktiv shock on a Trek Rail with a metric eyelet shock.
Kit contains a pair of custom manufactured pins which use the original trunnion bolts and spacers.
54mm Upper pin duplicates the original trunnion shock dimensions and threads.
40mm Lower pin is centered.
Both feature an internal hex to allow easy removal of stuck bolts.

Rail requires a 230x57.5mm shock and clearance is tight.  You likely need a custom build shock to fit 60mm.

Learn More

Pair of unequal shock hardware collars to mitigate frame mis-alignment
Designed for Scott Strike frames requiring 2 mm side shift
Includes 2 collars for install on 30 mm pin
Designed and manufactured by Shockcraft Learn More

Riese & Müller Load 60 or 75 cargo bikes need better suspension.
Shockcraft has a complete (front and rear) suspension upgrade package using a Manitou JUnit fork for the front and Manitou Mara Inline air shock for the rear.  A front only suspension upgrade can be purchased by not selecting the Rear Suspension Air Shock & Rear Shock Hardware options.

The full package includes a new fork, new shock, new lower headset, new shock hardware plus:
•   Configuration of the fork and modification to the headset so they bolt straight on.
•   New hub to fit the new fork, to be built into existing wheel using existing rim, spokes and nipples if condition allows.
•   Custom manufactured black anodised aluminium brackets to mount the light & mud guard to the new fork.

Kit only (does not include installation by Shockcraft) - kit available with installation here

See Related Products for more info & images for each component in this suspension upgrade kit

Please contact us to confirm availabilty for kit components Learn More

Riese & Müller Load 60 or 75 cargo bikes need better suspension.
Shockcraft has a complete (front and rear) suspension upgrade package using a Manitou JUnit fork for the front and Manitou Mara Inline air shock for the rear.  A front only suspension upgrade can be purchased by not selecting the Rear Suspension Air Shock & Rear Shock Hardware options.
The full package includes a new fork, new shock, new lower headset, new shock hardware plus:
•   Configuration of the fork and modification to the headset so they bolt straight on.
•   Wheel rebuild with new hub to fit the new fork.
•   Custom manufactured black anodised aluminium brackets to mount the light & mud guard to the new fork.

Existing rim, spokes and nipples will be reused if condition allows.

Includes installation by Shockcraft - kit also available for customer fitment here

See Related Products for more info & images for each component in this suspension upgrade kit

Please contact us to confirm availabilty for kit components Learn More

10 mm thick spacer for fork or shock travel reduction.
25mm OD, 13mm ID
Use inside a fork air-spring or coil rear shock damper to reduce length and stroke.
Use on a coil or air shock shaft to reduce stroke.

Manufactured by Shockcraft to order. Learn More

20 mm thick spacer for fork or shock travel reduction.
25mm OD, 13mm ID
Use inside a fork air-spring or coil rear shock damper to reduce length and stroke.
Use on a coil or air shock shaft to reduce stroke.

Manufactured by Shockcraft to order. Learn More

5 mm thick spacer for fork or shock travel reduction.
25mm OD, 13mm ID
Use inside a fork air-spring or coil rear shock damper to reduce length and stroke.
Use on a coil or air shock shaft to reduce stroke.

Manufactured by Shockcraft to order. Learn More

7.5 mm thick spacer for fork or shock travel reduction.
25mm OD, 13mm ID
Use inside a fork air-spring or coil rear shock damper to reduce length and stroke.
Use on a coil or air shock shaft to reduce stroke.

Manufactured by Shockcraft to order. Learn More

Custom spacer for fork or shock travel reduction.
Use inside a fork air-spring or coil rear shock damper to reduce length and stroke.
Use on a coil or air shock shaft to reduce stroke.

Manufactured by Shockcraft to order. Learn More

Fits Full Floater non-thru shaft Trek Fuel EX 2017-19.

Top End Shock Hardware:
10 x 60 mm, 7 piece kit (Fox)
10 mm bolt hole, 60 mm total width
Contains one pair of 1/2" flanged polymer bushings, stainless steel pin, two collars and o-rings
Fits almost all Fox rear shocks

Lower End Shock Hardware:
8 x 49.8 mm, 5 piece kit (Fox)
8 mm bolt hole, 1.960 inch (49.8 mm) total width
Offset collars
Contains one pair of 1/2" flanged polymer bushings, aluminim pin, two collars and o-rings.
Fits almost all Fox rear shocks


Fox Part Code;  803-03-229
Fox Part Code: 803-03-321


Learn More

Custom Hardware for fitting a Manitou Mara Inline Air shock to a Trek Rail with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes conversion pins and Manitou Mara Inline 230 x 60 mm

Resulting combination bolts straight in.  The Manitou Mara Inline in stock form has firm 4 stage compression damping and is suited to XC style riding.  We recommend a piggy back shock for more aggressive riders (Mara Pro).  Tuning for your weight and riding style is also available.

Please contact us to confirm availability

Learn More

Manitou Mara Pro Gen2 Air shock with conversion kit to fit a Trek Rail with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes Mara Pro Shock, Shockraft Lift Kit with conversion pin.
Optional tuning and heavy duty bolt kit.

Resulting combination bolts straight in.  The Manitou Mara Pro has adjustable HS & LS comprssion and is suited to all riding styles.  Tuning for your weight and riding style is also available - details here

Please contact us to confirm availability

Learn More

Conversion kit to fit a Marzocchi Bomber CR Coil shock to a Trek Rail.
Rail Reaktiv shocks are 230 x 57.5 mm air spring with 40mm lower trunnion hardware
Product includes Lift Kit with conversion pin, Marzocchi Bomber CR 205 mm trunnion shock and coil spring

Resulting combination bolts straight in.  The lift kit keeps the piggy back clear of the down-tube.

Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight.  Email us to have the calculator price credited and used towards purchase of your Marzocchi Bomber CR shock.

Please contact us to confirm availability

Tuning for your weight and riding style is also available - details here

Learn More

Conversion kit & modifications to fit a Marzocchi Bomber CR 230mm Coil shock to a Trek Rail.
Rail Reaktiv shocks are 230 x 57.5 mm air spring with 40mm lower trunnion hardware
Product includes Shock piggyback shortening, stroke change and Deaktiv Pin pin.
Shock is optional or customer supplied.

Resulting combination bolts straight in.  The stroke reduction and modifications keep the piggy back clear of the down-tube.

Choosing the right spring: use one of our spring rate calculators over here to make sure you get the right spring for your bike geometry and weight.  Email us to have the calculator price credited and used towards purchase of your Marzocchi Bomber CR shock.

Please contact us to confirm availability

Tuning for your weight and riding style is also available - details here

Learn More

Cane Creek Kisuma Coil shock with custom hardware to fit a Trek Slash or Remedy with Thru-Shaft Reaktiv
2018-2020 Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
Product includes Shockcraft Deaktiv conversion pins, Cane Creek Kitsuma 230 x 57.5 mm coil shock and coil spring

Resulting combination bolts straight in

Learn More

Custom Hardware and shock stroke modification to fit a Manitou Mara Inline to a Trek Remedy or Slash with Thru-Shaft Reaktiv
Thru Shaft Reaktiv shocks are 230 x 57.5 mm air spring with lower hardware offset to one side
This conversion allows fitment of a Manitou Mara Inline 230 x 60 or 65 mm air shock
Optional travel reduction on the shock to 57.5 mm and fitting custom shock pins.

Resulting combination bolts straight in.

Learn More

Custom shock modifications and optional hardware to fit a Super Deluxe Coil to Trek Remedy or Slash with Thru-Shaft Reaktiv.
Thru Shaft Reaktiv shocks are 230x 57.5mm air spring with lower hardware offset to one side.
Requires a Rockshox Super Deluxe 230x60mm coil with ball bearing lower mount.
A 230 x 65mm shock can be used with a travel reducing spacer to give 57.5 or 60mm stroke.
Modification service involves removing and modifying the ball bearing shaft head to fit custom shock pins.

Pricing options cover customer supplied pins (from non-thru-shaft air shock) or Shockcraft manufacture.  De-select Shockcraft Manufactured Pins if not required.

Learn More